Airports

Airfield Electrician / Airfield Lighting Technician

Also posted as Electrician - Airfield Ground Lighting (AGL), Airport Electrician, Airfield Lighting Maintenance Technician, Electrical Technician (airport), NAVAIDs and Lighting Technician

See it in the graph

Maintains runway, taxiway and apron edge lighting, centreline lights, PAPIs, runway guard lights and stop bars, plus the field electrical vault with constant current regulators (6.6A series circuits) and control systems that also power ILS and NAVAIDs, in accordance with the ACM, FAA ACs (or TP312/CARs), NFPA and NEC. Operates the ALCMS, handles emergency lighting work orders from operations, street and terminal power, generators and gates, and is on call for after-hours outages and winter operations.

What they do

  • Maintain and repair airfield lighting fixtures (PAPI, runway/taxiway edge and centreline, stop bars, runway guard lights, approach lighting) and signs per ACM and FAA ACs / TP312
  • Maintain the field electrical centre: constant current regulators, switchgear, control systems powering ILS, NAVAIDs and communication sites
  • Operate the Airfield Lighting Control and Monitoring System; perform fault analysis, insulation resistance and load testing, lighting inventory
  • Receive and complete airfield electrical work orders including emergency work; document in CMMS
  • Maintain terminal and landside electrical: generators, gates, PA, parking equipment, street lighting
  • Be on call for after-hours lighting, signage and electrical emergencies and winter operations; liaise with contractors

What they measure

  • Lighting fixture outage % (Part 139 allows limited unserviceable lights per circuit)
  • Circuit faults and insulation resistance trend
  • Emergency work orders response time
  • NOTAMs caused by lighting
  • PM completion on CCRs and vaults

Systems they use

  • ALCMS
  • Constant current regulators and series circuit test equipment
  • CMMS
  • Generator monitoring
  • BAS (terminal)
  • Photometric test vehicles
  • Constant current regulator (6.6 A CCR)
  • Series circuit isolation transformers

Certifications

  • Journeyman/Red Seal electrician licence
  • ACE Airfield Lighting Maintenance
  • Airside vehicle operator permit / movement area driver
  • Aeronautical radio operator certificate
  • Fall arrest, WHMIS/HAZCOM

Jobs to be done

Pain points

  • Vault 'deep in the bowels' of the terminal with a 'spider web' of abandoned underground cabling that crews had to treat as live, causing delays. (heard in Montgomery Regional installs prefabricated airfield electrical center - Airport Improvement)
  • Must hike to remote beacon sites over steep, uneven terrain and work in confined spaces, heights and inclement weather. (heard in Electrician - Victoria Airport Authority)
  • A Mike Holt forum poster who worked with airfield regulators notes the open-circuit voltage of a 6.6 A constant current regulator is treated as 5 kV class, and calls the circuits very dangerous because a second ground fault is just a lesser load the regulator adjusts for. (heard in Airport Lighting Series Circuit (Mike Holt's Forum, search excerpt))
  • An Alaska journeyman electrician says airfield lighting conduits accumulate water that freezes and breaks the 5 kV series conductor, and the regulator then shuts down when it can't supply enough voltage to maintain amperage; locating the break is the problem. (heard in Airport circuit (Mike Holt's Forum, search excerpt))
  • An Eng-Tips thread (seen only as a search summary; the page refused WebFetch) describes a runway loop on a 6.6 A CCR that tested fine at the regulator but showed a high-resistance path to ground across roughly 8,000 ft of cable and about 80 transformers, so the fault had to be localized by splitting the loop. (heard in Eng-Tips thread on airfield series circuit fault (search summary))

Sources

More roles in airports

Every kind of facility

Every job category

See it in the graphAll of PersonaDBBuild an app for this role with Rivet

From PersonaDB, Mapped’s directory of who works in a facility and what they’re trying to get done. Every sourced entry links to the page it came from. PersonaDB’s words are free to reuse under CC BY 4.0 with credit to Mapped; the pages it cites keep their own terms. Cite as: “Airfield Electrician / Airfield Lighting Technician”, PersonaDB, Mapped, https://rivet.mapped.com/personas/role/airport/airfield-electrician