Data center

Liquid Cooling / CDU Technician

Also posted as Cooling Distribution Unit & Mechanical Systems Specialist, Liquid Cooling Technician, Cooling Systems Technician, Rack Build Technician (Liquid Cooling), Direct Liquid Cooling (DLC) Technician, Field Service Specialist - Liquid Cooling (OEM)

See it in the graph

Keeps the technology cooling loop healthy in liquid-cooled halls: coolant distribution units, pumps, heat exchangers, filtration, manifolds, hoses and quick-disconnects feeding direct-to-chip cold plates and rear-door heat exchangers. Does rounds, inspects for seepage, responds to leak and flow alarms, maintains and calibrates CDUs to keep supply temperature, differential pressure and flow inside SLA ranges, supports fill, flush, air removal, leak testing and flow verification at rack turn-up, and logs coolant chemistry and lab results. Open postings now name the role separately from the general critical facilities technician, and employers retrain existing facilities staff because liquid-loop experience is scarce.

What they do

  • Perform rounds on CDUs, secondary loops, manifolds and rack connections; inspect for seepage, drip-tray and leak-sensor alarms, and document conditions
  • Maintain, inspect, clean, troubleshoot and calibrate CDUs and associated pumps, VFDs, heat exchangers and filters to keep temperature, pressure and flow in SLA ranges
  • Respond to leak, low-flow, pressure-loss and temperature alarms under the emergency operating procedures; isolate, contain and escalate
  • Support coolant filling, flushing, filtration, air removal, pressure and leak testing and flow verification when racks or loops are turned up
  • Sample coolant and log chemistry (pH, conductivity, inhibitor levels); escalate lab results outside set parameters and apply supplier remediation instructions
  • Disconnect and reconnect liquid lines for server hot-swaps using quick-disconnect fittings
  • Keep maintenance records, PM history and root-cause notes for each CDU and loop; help build predictive maintenance tools
  • Follow PPE, ESD, lockout/tagout and spill-response procedures around live electrical equipment

What they measure

  • CDU supply temperature, differential pressure and flow vs SLA range
  • Leak events and time to isolate
  • Coolant lab results within limits and open remediation actions
  • CDU PM completion and calibration status
  • Alarm response time (CDU pressure loss, 2 a.m. flow alarm)
  • Loops turned up with fill, flush and leak test documented
  • Unplanned cooling downtime minutes

Systems they use

  • Coolant distribution units (CDUs) and CDU diagnostic software
  • Building automation / BMS and DCIM trends (flow, differential pressure, supply and return temperature)
  • Leak detection sensors and shutoff logic
  • Facility water system and technology cooling system loops
  • Manifolds, quick-disconnect fittings, cold plates, rear-door heat exchangers
  • Coolant sampling and lab analysis (PG-25 and other fluids)
  • Predictive maintenance tools
  • MOPs, SOPs and EOPs
  • CMMS

Certifications

  • EPA 608 Universal (listed as a plus by CyrusOne)
  • OSHA-10 or OSHA-30
  • ESD certification
  • Liquid-cooling OEM certifications and vendor CDU training (Vertiv, Schneider Electric, CoolIT)
  • HVAC or mechanical trade school
  • CDCEP

Jobs to be done

  • Catch a leak or flow loss before the rack throttles · UptimeWhen a secondary loop loses pressure or a leak sensor trips, I want to see the CDU, the manifold and the racks fed by it shown with the latest flow, pressure and temperature trend, so I can isolate the right segment and escalate within minutes instead of walking the hall. AlertsMapBoard
  • Keep every CDU inside its SLA range · MaintenanceWhen CDU performance drifts, I want to see each unit's calibration status, setpoints and trend against its SLA range with its PM and inspection history, so I can plan maintenance on the unit that needs it and keep records that show the SLA was held. BoardScheduleReport
  • Keep coolant chemistry in spec and remediation on track · QualityWhen coolant samples come back from the lab, I want to see each loop's latest results against limits, the next sampling date and any open remediation with the fluid supplier, so I can act on out-of-spec fluid before corrosion or fouling reaches the cold plates. BoardAlertsWorkflow
  • Turn up a loop with fill flush and leak test on record · IT and OTWhen new racks or a new loop are connected, I want to see the fill, flush, air removal, pressure and leak test and flow verification steps checked off with results per loop, so I can hand over to operations with baselines documented and no open punch items. ChecklistWorkflow

Pain points

  • Liquid cooling tightly couples facility infrastructure with IT, and the industry lacks consensus on the division of ownership and maintenance for DLC components between facilities and IT teams. (heard in Liquid cooling will not outgrow its high-density niche (Uptime Institute Journal, 2026-04-15))
  • Coolant volume is much less than the air in a data hall, so there is less time for generators to start; ride-through typically requires UPS power for CDU pumps at a minimum, which facility equipment rarely has. (heard in Liquid cooling will not outgrow its high-density niche (Uptime Institute Journal, 2026-04-15))
  • DC Geeks reports an immediate talent shortage in liquid cooling, with employers retraining existing facilities staff; it puts cooling systems technician pay at about $62,000 entry, $84,000 mid and $102,000 senior (2026, aggregated from Glassdoor, PayScale and Salary.com). (heard in Liquid Cooling Data Center Careers and Salary 2026 (DC Geeks, June 2026))
  • CyrusOne's version of the role asks for 7+ years with hands-on CDU repair and reads as a senior specialist; Wesco's rack build technician asks 2+ years, so the title spans entry technician to specialist. (heard in Cooling Distribution Unit & Mechanical Systems Specialist, CyrusOne)

Sources

More roles in data center

Every kind of facility

Every job category

See it in the graphAll of PersonaDBBuild an app for this role with Rivet

From PersonaDB, Mapped’s directory of who works in a facility and what they’re trying to get done. Every sourced entry links to the page it came from. PersonaDB’s words are free to reuse under CC BY 4.0 with credit to Mapped; the pages it cites keep their own terms. Cite as: “Liquid Cooling / CDU Technician”, PersonaDB, Mapped, https://rivet.mapped.com/personas/role/data-center/liquid-cooling-cdu-technician