Transit, terminals and parking

Transit Facilities Mechanic

Also posted as Facilities Maintenance Mechanic, Building Maintenance Mechanic, Facilities Maintenance Worker, Building Maintenance Specialist, Structure Maintainer, Maintenance Worker (Transit Facility Maintenance)

See it in the graph

Keeps transit buildings, bus shelters, stops and fleet maintenance equipment working: carpentry, doors, roofs, concrete, plumbing, HVAC, electrical and PLC-controlled equipment, fuel and CNG dispensing with leak detection, vehicle lifts, fire doors and bus wash systems. Works any shift with overtime and emergency response, and enters materials used and time spent in the CMMS.

What they do

  • Perform preventive maintenance on department and manufacturer schedules
  • Repair buildings, shelters, stops and shop equipment (lifts, hoists, fire and roll doors)
  • Maintain fuel dispensing, leak detection, CNG compressors and storage
  • Diagnose and repair HVAC, electrical wiring and PLC sensors, modules and actuators
  • Plumbing, welding and fabrication; place traffic control at work sites
  • Estimate time, labor and materials; log work in the CMMS; complete log sheets
  • Clean shop areas and grounds at smaller agencies

What they measure

  • PM tasks completed on schedule
  • repeat repairs
  • response time to emergency calls
  • shop equipment downtime

Systems they use

  • CMMS
  • PLC programming tools
  • HVAC controls
  • fuel management and leak detection
  • fire protection systems
  • bus wash controls

Certifications

  • facilities maintenance apprenticeship
  • electrician or HVAC license (desired)
  • EPA 608
  • UST/fuel dispensing certification
  • forklift

Jobs to be done

  • Get the alarm with the asset and the drawing · UptimeWhen a fuel leak detector, CNG compressor or HVAC fault alarms at night, I want the alarm with the asset location, schematic and history on my device, so I can fix it on the first trip instead of returning for parts or drawings. AlertsWorkflow
  • Work the PM list by building not by ticket · MaintenanceWhen I am sent to a bus terminal or station, I want every PM and open repair at that site listed together, so I can close several items in one visit and log them once. MapChecklistSchedule
  • Keep lifts doors and fire systems inspection ready · ComplianceWhen lifts, hoists, fire doors and sprinklers are due for inspection, I want the schedule and last results per asset, so I can keep the shop compliant and avoid an out-of-service lift on a busy night. ScheduleChecklist

Pain points

  • Routine, frequent exposure to toxic or caustic chemicals and heavy lifting, on days, evenings, nights, weekends and holidays. (heard in Broward County Transit: Maintenance Worker (Transit Facility Maintenance))
  • The mechanic must supply a complete set of facility maintenance hand tools and be ready for overtime and emergency response. (heard in Pierce Transit: Transit Facilities Mechanic)
  • General maintenance and repair workers earned a median of $49,590 a year ($23.84 an hour) in 2025. (heard in O*NET 49-9071.00 Maintenance and Repair Workers, General)
  • Mechanics check off components on a parent-asset PM checklist with no equipment IDs, so for 1,169 of 5,000 PM services tested the history of critical components such as DC breakers could not be traced in EAM. (heard in Sound Transit Audit Division, Work Order Process Audit (Report 2020-003))
  • MTA's Inspector General found NYCT yard facility staff were not instructed how to do daily fire alarm inspections, staff testing fire pumps lacked required certifications, and fire pumps at 207th Street Yard had not been tested annually. (heard in MTA Inspector General press release, OIG Audit Found Basic Problems with Monitoring and Maintaining Fire Alarm and Suppression Systems at Major NYC Transit Facilities)
  • Some fire alarm and suppression components in NYCT yards are so old that spare parts no longer exist and must be remanufactured offsite, causing delays that trigger fire watches, and NYCT lacked enough certified staff to perform fire watches. (heard in MTA Inspector General press release, OIG Audit Found Basic Problems with Monitoring and Maintaining Fire Alarm and Suppression Systems at Major NYC Transit Facilities)
  • A Metrorail quality review found a yard's main FM200 fire suppression tank empty during PM, running on the reserve tank, with the replacement work order sitting In Progress in Maximo since December 2022. (heard in Washington Metrorail Safety Commission, Audit of Emergency Management and Life Safety Programs (Jan 29, 2025))
  • Among 50 sampled general equipment mechanics who maintain fire life safety assets, lockout/tagout training compliance was 34% and man-lift 14%; among 9 fire equipment technicians, confined-space refresher was 22% and man-lift 0%. (heard in Washington Metrorail Safety Commission, Audit of Emergency Management and Life Safety Programs (Jan 29, 2025))

Sources

More roles in transit, terminals and parking

Every kind of facility

Every job category

See it in the graphAll of PersonaDBBuild an app for this role with Rivet

From PersonaDB, Mapped’s directory of who works in a facility and what they’re trying to get done. Every sourced entry links to the page it came from. PersonaDB’s words are free to reuse under CC BY 4.0 with credit to Mapped; the pages it cites keep their own terms. Cite as: “Transit Facilities Mechanic”, PersonaDB, Mapped, https://rivet.mapped.com/personas/role/transit-parking/transit-facilities-mechanic