Utilities and critical process infrastructure
District Energy / Central Plant Operator (Stationary Engineer)
Also posted as Stationary Engineer, Central Plant Operator, Boiler Operator, Operating Engineer, Plant Operator II (steam and chilled water), Lead Stationary Engineer
Operates the campus or hospital central plant on a shift: high-pressure steam boilers, high-temperature hot water, centrifugal and absorption chillers, cooling towers, pumps and generators; adjusts combustion, water levels and chemistry; logs temperature, pressure, fuel, water and electrical load; responds to BAS alarms and off-hours requests; and often serves as the facilities point person for critical building systems at night. Licence classes set what a person may run unsupervised; local government stationary engineers earn a median $105,500.
What they do
- Run boilers, chillers, pumps and auxiliary equipment to supply steam, hot water and chilled water; adjust valves, combustion air and fuel flow
- Monitor and test boiler, chilled, tower and condenser water chemistry and add treatment; read gauges, meters and charts to confirm proper operation
- Keep daily logs of operation, maintenance and safety including test results, operating hours, fuel use and generator balance; write shift reports
- Monitor and respond to building automation alarms; coordinate inspection, repair and maintenance including switching pumps and boilers; liaise with contractors
- Assist with medical gas, emergency generators and fire protection at hospital plants; answer the plant phone and radio and respond to fire and security alarms
What they measure
- steam and chilled water availability
- kW/ton and boiler efficiency
- water chemistry within limits
- alarms responded
- log completeness
- unplanned outages to buildings
Systems they use
- BAS / plant controls (Niagara, Automated Logic, DeltaV)
- SCADA and CMMS
- boiler burner management and combustion controls
- chiller plant optimisation and thermal energy storage
- water treatment test kits
- energy meters
Certifications
- state or city stationary engineer / boiler operator licence by class (e.g., Maryland First Grade)
- apprenticeship of about 4 years / 8,000 hours
- trade licences (plumbing, HVAC) preferred at some campuses
- certifications within 12 months of hire at some hospitals
Jobs to be done
- Dispatch chillers and storage for the lowest kw per ton · EnergyWhen multiple chillers, VFD pumps and thermal storage can meet the same load, I want plant kW/ton, tower approach and TES state live with the recommended dispatch, so I can stage equipment for efficiency instead of habit. BoardScheduleAlerts
- Keep the boiler water and the log honest · MaintenanceWhen I test boiler water and log pressures, fuel and levels every shift, I want chemistry results and readings captured against limits with the dosing recorded, so I can see scale or corrosion coming and the log writes itself. ChecklistAlerts
- Be the night point person without missing an alarm · UptimeWhen I am the facilities point person for the whole hospital at night, I want BAS alarms prioritised by patient-care impact with the responsible contact and procedure, so I can handle the critical ones first from the plant. AlertsBoardWorkflow
- Plan an outage that nobody notices · MaintenanceWhen a boiler or chiller must come down for inspection, I want building loads, redundancy and the switching sequence planned against the forecast, so I can take it offline without a building losing steam or cooling. ScheduleWorkflowBoard
Pain points
- Stationary engineers work in boiler rooms with heat, noise, oil and grease on 8- or 12-hour rotating shifts including weekends and holidays; local government pays a median $105,500. (heard in BLS OOH: Stationary Engineers and Boiler Operators)
- An essential night shift (10 p.m. to 6 a.m.) lead engineer runs a 50 million BTU hot-water plant and a 2,000-ton chiller and trains the first-grade engineers (UMBC). (heard in UMBC: Stationary Engineer, High Temperature/Pressure (Aug 2026))
- A campus central plant lead post says personal cell phone usage may be required for duties, cites multi-function authentication requirements, and requires periodic standby or on-call service. (heard in Midwestern State University (TX): Utility Mechanic / Central Plant Operator Lead classification)
- On a courthouse addition, an engineer's team backed off tying new VSD chillers into the constant-speed chiller system because constant-speed starts and stops could drive the VSD primary and secondary pump demands erratically; they split the systems and ran one VSD chiller continuously for in-between loads. (heard in Sequencing VSD and constant speed chillers (Eng-Tips))
- Whether a boiler plant needs a licensed engineer in attendance varies by locality, so designers ask on forums and are told to check with the fire marshal; one engineer reports routinely seeing 100 psi boilers running unattended. (heard in When do you need a Building Engineer 24-hours a day? (Eng-Tips))
- The University of Tennessee shuts campus steam off for about a week each year to repair lines, vaults and valves, leaving many buildings without hot water and heat; it added isolation valves so sections can be isolated for future repairs. (heard in Facilities Services Completes Another Successful Steam Outage (UT Knoxville))
- The University of Maryland's Central Energy Plant lost steam service twice in one January day, cutting heat and hot water campus-wide, closing campus and cancelling classes for two days; the university warned cold could cause intermittent disruptions as underground pipes freeze. (heard in Campuswide Steam Outage: Updates and Communications (UMD Facilities))
Sources
- O*NET 51-8021.00 Stationary Engineers and Boiler Operators
- BLS OOH: Stationary Engineers and Boiler Operators
- UMBC: Stationary Engineer, High Temperature/Pressure (Aug 2026)
- State of Connecticut / UConn Avery Point: Lead Stationary Engineer (2019)
- UVM Medical Center: Central Plant Operator posting
- Midwestern State University (TX): Utility Mechanic / Central Plant Operator Lead classification
- Missouri State University: Utilities Manager (8875) job description
- IDEA: Western University's Deep Energy Retrofit of the Chiller Plant South
- IDEA: The Evolution of the UT Austin Utility Plants (Dec 2018 presentation)
- Sequencing VSD and constant speed chillers (Eng-Tips)
- Facilities Services Completes Another Successful Steam Outage (UT Knoxville)
- When do you need a Building Engineer 24-hours a day? (Eng-Tips)
- Campuswide Steam Outage: Updates and Communications (UMD Facilities)
More roles in utilities and critical process infrastructure
- Utility General Manager / Director of Utilities
- Plant Superintendent / Plant Manager (water, wastewater, generation or central plant)
- Chief Plant Operator / Operations Shift Supervisor
- Water Treatment Plant Operator
- Wastewater Treatment Plant Operator
- Water Distribution Operator / Field Crew
- Wastewater Collection System Supervisor
- Sewer Collection System Technician / Crew
- Maintenance Manager / Maintenance Superintendent
- Plant Maintenance Mechanic (water / wastewater / powerhouse)
- Instrumentation & Controls Technician (SCADA / I&C)
- SCADA / Controls Engineer and SCADA Manager
- OT Systems & Cybersecurity Specialist
- Laboratory Supervisor / Water Quality Analyst
- Environmental Compliance & Pretreatment Manager
- Asset Management Program Manager (and GIS / asset data analysts)
- Capital Improvement Program Manager
- Utility Engineer (water / wastewater / electrical)
- Safety Officer / EHS Manager (utility)
- Energy Manager (utility / central plant)
- Power Plant Operator / Control Room Operator
- Power System Dispatcher / System Operator
- Substation Electrician / Relay Technician
- Electric Lineworker / Line Crew
Every kind of facility
- Airports
- Cross-cutting and portfolio roles
- Data center
- Education campuses
- Government, civic and public-safety buildings
- Hospitals and healthcare facilities
- Laboratories and life-science facilities
- Manufacturing plants and industrial sites
- Multifamily residential and rental housing
- Office buildings and corporate workplaces
- Retail, hospitality and venues
- Transit, terminals and parking
- Utilities and critical process infrastructure
- Warehouses and distribution centers