Manufacturing plants and industrial sites

Condition Monitoring / Predictive Maintenance (PdM) Technician

Also posted as PdM Technician, Reliability Technician, Vibration Analyst (Category I/II), Vibration Technician, Predictive Maintenance Analyst, Condition Monitoring Technician

See it in the graph

Walks the scheduled vibration, infrared, ultrasound, oil-sampling and motor-test routes on the plant's rotating and electrical assets, keeps the condition-monitoring database and turns findings into work requests for the planner. Sits between the reliability engineer, who owns strategy and bad-actor analysis, and the maintenance crew, who does the repair. Measured on route completion, findings converted to planned work and the fall in unplanned downtime.

What they do

  • Conduct scheduled vibration analysis routes on critical rotating equipment and infrared thermography inspections of electrical and mechanical assets (Link Snacks posting)
  • Execute airborne and structure-borne ultrasound inspections, collect oil and lubricant samples, and run motor circuit tests (Link Snacks posting)
  • Maintain the condition-monitoring database, routes, sensor configurations, alarm thresholds and historical equipment records (Link Snacks and Allied Reliability postings)
  • Generate work requests from PdM findings, recommend corrective actions and help the planner define repair scopes and priorities (Link Snacks posting)
  • Review vibration, thermal, oil and ultrasound results, document findings and communicate risks to the reliability engineer; track equipment health trends (Link Snacks posting)
  • Assist asset criticality reviews, bad-actor analysis and root cause failure investigations (Link Snacks posting)
  • Support planned shutdowns and operator asset-care (TPM) programs (Link Snacks posting)
  • Align drive trains and balance fans where the role includes corrective work (Visual Inspection Systems posting)

What they measure

  • PdM route completion rate (above 95% in one posting)
  • PdM findings converted to planned work
  • defect identification rate
  • condition-monitoring compliance
  • reduction in unplanned downtime and emergency work orders
  • MTBF on critical assets
  • maintenance overtime share (one plant: 12.9% toward below 8%)
  • repeat failures

Systems they use

  • CMMS (SAP PM, Fiix and Maintenance Connection named in one posting)
  • vibration data collectors and analysis software (SKF, Emerson AMS and Fluke named)
  • infrared cameras with trending software
  • airborne and structure-borne ultrasound instruments
  • motor circuit analysis equipment
  • oil analysis lab portals
  • wireless vibration sensors feeding a historian or CMMS alarms
  • predictive analytics platforms (Seeq, GE Vernova, Aspen Mtell named in a midstream posting)
  • Excel

Certifications

  • Vibration Analyst ISO 18436-2 Category I or II (Category I covers route data collection against alert settings, Category II basic analysis and the results database)
  • Infrared thermography certification (Level I/II)
  • Ultrasound inspection certification
  • ICML Machinery Lubrication Technician (MLT)
  • SMRP CMRT
  • ISO 18436-4 lubrication analyst Category II (preferred in a service-provider posting)

Jobs to be done

  • Complete the route and catch what the last one missed · MaintenanceWhen I walk the monthly vibration route, I want each point's new reading stacked against its own history and its sister machines at the same load, so I can spot a developing bearing or gear fault instead of trusting a default alarm limit. ChecklistBoardAlerts
  • Turn a finding into a planned job · MaintenanceWhen a reading crosses alert, I want to raise a work request with the spectrum, severity and recommended repair scope attached and watch it move through planning, so I can prove the finding became planned work before the machine failed. WorkflowReport
  • Choose what gets sensors and what gets a screwdriver · CostWhen the plant asks for wireless sensors on everything, I want each asset's criticality, downtime cost, motor size and speed, and failure history side by side, so I can say which machines justify online monitoring, which a route, and which a rebuild on interval. ReportScorecard
  • Keep ir and ultrasound findings on the asset record · MaintenanceWhen I finish an infrared scan of the switchgear or an ultrasound survey of the air lines and steam traps, I want each image or reading saved against the asset with its baseline and trend, so I can tell whether a hot connection or a leaking trap is worse than last quarter rather than just hot today. ChecklistReportMap

Pain points

  • Contracted vibration route teams relying on generic pass/fail software told a plant that two pumps with known bad bearings, already slated for repair, were fine. (heard in Methodologies for Vibration Monitoring technologies (Eng-Tips))
  • A plant engineer suspects his manager wants wireless sensors for his own resume; for the plant's downtime costs and motor sizes they are not cost efficient, and the plant would do as well rebuilding motors on a PM. (heard in Methodologies for Vibration Monitoring technologies (Eng-Tips))
  • A 2004 Eng-Tips reply puts contracted thermography services at about $1,000 a day, or a half-day rate if a local IR technician or company is available. (heard in price for thermography services (Eng-Tips, Nov 2004))
  • A food plant's posting makes the PdM technician the primary execution resource for moving from reactive to predictive maintenance, with 90-day, 6-month and 12-month success measures including cutting maintenance overtime from 12.9% toward below 8%. (heard in Reliability Technician (Predictive Maintenance Technician), Link Snacks, Perry GA (posted 2026-10-09, open))

Sources

More roles in manufacturing plants and industrial sites

Every kind of facility

Every job category

See it in the graphAll of PersonaDBBuild an app for this role with Rivet

From PersonaDB, Mapped’s directory of who works in a facility and what they’re trying to get done. Every sourced entry links to the page it came from. PersonaDB’s words are free to reuse under CC BY 4.0 with credit to Mapped; the pages it cites keep their own terms. Cite as: “Condition Monitoring / Predictive Maintenance (PdM) Technician”, PersonaDB, Mapped, https://rivet.mapped.com/personas/role/manufacturing/condition-monitoring-pdm-technician