Manufacturing plants and industrial sites

Industrial Hygienist

Also posted as Occupational Hygienist, IH Specialist, Chemical Hygiene Officer, Occupational Health Specialist, Exposure Assessment Specialist, Industrial Hygiene Consultant, EHS Officer

See it in the graph

Anticipates, recognises, evaluates and controls health hazards: noise, dust and fumes, solvents, heat, ergonomics. Runs sampling campaigns, compares results to exposure limits (85 dBA NIOSH / 90 dBA OSHA for noise), and specifies ventilation and other engineering controls that facilities then must keep working.

What they do

  • Develop or maintain hygiene programs, such as noise surveys, continuous atmosphere monitoring, ventilation surveys (O*NET)
  • Collect samples of dust, gases, vapors, or other potentially toxic materials for analysis (O*NET)
  • Investigate the adequacy of ventilation, exhaust equipment, lighting, or other conditions that could affect employee health (O*NET)
  • Collaborate with engineers or physicians to institute control or remedial measures (O*NET)
  • Apply the hierarchy of controls and reassess exposures as conditions change (ARECC, Wikipedia)

What they measure

  • exposures above action level
  • similar exposure groups assessed %
  • hearing conservation program enrolment
  • ventilation systems within spec
  • sampling backlog

Systems they use

  • sampling pumps, dosimeters, direct-reading instruments
  • IH data management (Medgate, EcoLogic ADAM)
  • ventilation test instruments
  • EHS software
  • SDS/chemical inventory
  • Expostats

Certifications

  • CIH (BGC)
  • CSP
  • ABIH/BGC credentials
  • MSc IH or related

Standards they work to

  • AIHA exposure assessment strategy (exposure categories 0-4): AIHA's 'A Strategy for Assessing and Managing Occupational Exposures' defines exposure categories, from 'no action needed' (0) to 'unacceptable' (4), used to characterize the acceptability of exposures and guide follow-up.

Jobs to be done

  • Know when ventilation stops protecting people · SafetyWhen local exhaust, dust collection or fume extraction degrades, I want airflow and differential pressure monitored against the design values, so I can treat a failing LEV hood as an exposure event rather than discover it at the next annual survey. AlertsBoardChecklist
  • Map noise heat and chemical exposure by area · SafetyWhen I plan sampling and controls, I want noise, heat and air-quality readings mapped to spaces and the equipment producing them, so I can target the loudest and hottest zones and show where hearing protection and heat breaks are required. MapReport
  • Trend exposure data for similar exposure groups · ComplianceWhen results return from the lab, I want them stored against the worker group, task and area with limits applied, so I can see trends and justify engineering controls to management with data. ReportBoard

Pain points

  • Industrial hygiene work in plants often sits inside the EHS manager role rather than a dedicated IH, so sampling programs compete with daily safety firefighting (heard in O*NET 29-9011.00 Occupational Health and Safety Specialists)
  • The Synergist (Dec 2020) says data collected beyond standard chain-of-custody fields is left to the hygienist's discretion, insurers have stored exposure data in disparate non-standardized files that are hard to search, and many sources lack context (conditions, employee, process) that gives measurements value. (heard in Industrial Hygiene Data Standardization (The Synergist, AIHA, Dec 2020))
  • A former corporate industrial hygiene director at a large manufacturer writes that hygienists would like six to ten samples per similar exposure group but operational and time constraints often force exposure decisions on far fewer, sometimes one, which says nothing about variability and hides worker, shift, task or seasonal bias. (heard in Addressing Our Low-n Conundrum Using Modern Bayesian Statistical Tools (The Synergist, AIHA, 2024-10))
  • An industrial hygiene consultant who is vice chair of the Joint Industrial Hygiene Ethics Education Committee warns in The Synergist (2025) that IH program metrics are often 'vanity' or performative: they report areas already under control, use denominators that include hours with no exposure potential, or exclude data that does not support the desired result, rather than showing management the program gaps. (heard in Performance vs. Performative: Make Metrics Matter (The Synergist, AIHA, 2025-02))
  • A NIOSH Health Hazard Evaluation at a 24/7 cable-accessory plant found holes in the ductwork, disconnected ducts and broken dampers, and a spray painter's toluene exposure above the ACGIH TLV once adjusted for a 12-hour shift; NIOSH recommended repairing the ventilation and adding exhaust at the drying racks. (heard in Evaluation of Metals, Solvents, Formaldehyde, Ventilation, and Ergonomics (NIOSH HHE, 2014-05))
  • At a South Carolina tire plant where NIOSH found general and local exhaust operating properly and the company's database tracked exposures and control effectiveness, NIOSH evaluated employee concerns about exposures and health and recommended explaining results and ventilation in plain language and regularly reporting how each concern was addressed. (heard in Evaluation of Work-related Health Concerns at a Tire Manufacturing Plant (NIOSH HHE, 2013-06-01))

Sources

More roles in manufacturing plants and industrial sites

Every kind of facility

Every job category

See it in the graphAll of PersonaDBBuild an app for this role with Rivet

From PersonaDB, Mapped’s directory of who works in a facility and what they’re trying to get done. Every sourced entry links to the page it came from. PersonaDB’s words are free to reuse under CC BY 4.0 with credit to Mapped; the pages it cites keep their own terms. Cite as: “Industrial Hygienist”, PersonaDB, Mapped, https://rivet.mapped.com/personas/role/manufacturing/industrial-hygienist